供应

关于使用情况及订多件运费问题可以进行电话等咨询

陈工 13428623059

纳米抗污增亮剂

Anti fouling brightening agent

 

增光 add lustre to    

增色burnish  

抗污Antifouling

 

主要成分：

有机硅和氟的化合物为主要有效成分。

 

产品特点：

本成品采用纳米技术无色，透明，无毒环保，具有隔热，抗紫外线性能保持恢复原物面的颜色 ，防水，防油污等污渍渗透，能持久抑制细菌繁殖（杀菌型）

 

使用方法：

1.使用前摇动瓶子约15秒,瓶子倾斜45度,喷射距离台面15到20厘米,用食指轻轻按喷嘴

2.喷涂完毕停留约5分钟（气温超过28℃时，3分钟即可擦匀抗污剂），用干净抹布擦均匀即可（羊毛球抛光效果更好）。

3.确保下次可以正常使用,倒瓶,压喷嘴约3秒,清洗喷嘴和残渣。

4.本产品表面固化为30分钟左右，12到24小时完全固化

 

注意事项

1.本产品是易燃气雾罐产品，内含压力气体，燃烧（即使是空罐）应储存正常温度下，严禁爆露40℃以上，避免阳光直射。

2使用前表面研磨(800 - 1000目)应清理干净,触摸没有杂质粒子,肉眼观察没有砂纸痕迹。

3.尽量避免在潮湿的环境中使用，以免影响效果。

应用范围

本产品适用于大理石、人造石、石英石、岗石、微晶石等。

警告

第一次使用,请做测试,严禁接触眼睛或吞食，不用时盖好瓶盖，避免儿童触及。

 

 

Main ingredients：

Organic silicon and fluorine compounds as the main effective components. effective components.

Product features：

Product this adopt nanotechnology to colorless, transparent, non-toxic environmental protection, have heat insulation, ultraviolet resistance to keep the original recovery

The color, waterproof, prevent oil stains such as penetration, long-lasting inhibit bacteria reproduction (sterilization)

Method of use：

1. Shake the bottle before use about 15 seconds, the bottle tilt 45 degrees, jet distance mesa for 15 to 20 cm, with your index finger gently press the nozzle.

2. After spraying stay for about 5 minutes (when temperatures exceed 28℃, 3 minutes rub resistance to fouling agent), with a clean cloth

Rub evenly (wool ball better polishing effect).

3.To ensure that the next time can normal use, pour bottles, press down nozzle about 3 seconds, cleaning nozzle and residue.

4. This product surface curing for about 30 minutes, completely curing for 12 to 24 hours

 

Matters needing attention：

1. This product is flammable aerosol cans products, containing gas pressure, combustion (even empty cans) should be stored under normal temperature, it is forbidden to exposure above 40 ℃, avoid direct sunlight.

2 before using surface grinding (800-1000 mesh) should be cleaned up, touch no impurity particles, the naked eye

Observe no sand paper traces.

3. Try to avoid in damp environment, so as not to affect the effect.

 

Range of application：

This product is suitable for marble, artificial stone, microlite,quartz stone etc.

Warning：

First use, please do the test, it is strictly prohibited contact with eyes or swallowed, need not when cover cap and Avoid children hit.

 

 

 

 

 

使用后效果：

 

产品描述Products Deion
规格：45ml。 适用材质：纯亚克力板材、复合亚克力板材、不饱和聚酯板材。   适用颜色：差异化调色。  涂胶延米：9米。 
胶管材质：PBT。  产品优点：高效、省时、专业、稳定、环保。  产品缺点：成本偏高。


Dongguan Saili Industrial Materials CO.,LTD

SL8030 series adhesive for quartz stone is a kind of dual-component adhesive with high performance structure. It is characterized by rapid solidification, strong adhesion, good color compatibility, yellowing resistance, high temperature resistance, wear resistance, waterproof, oil resistance and other excellent performances in adhesive bonding of quartz stone. When SL8030 is used with curing agent in 10:1, the operation time is 8-13 minutes and the solidification time is 20-25minutes. The polishing processing can be conducted after 25 minutes.

石英石后挡水胶：

由于石英石弧面加工困难，只能加工直角，而直角又造成台面使用过程中不容易清洁，因此赛丽公司针对此问题研发出发用于石英石直角的弧面胶粘剂，此胶使用简

单，只须将胶打在直角上，固化后形成一个弧面，产品具有防污、防潮、不发霉、不黄变等特点，解决了石英石胶加工弧面的难题。

       Since there is some difficulty in processing the cambered surface of quartz stone as it can only process the right angle. However, the right 

angle cause the platform to be difficult to clean in application, thus, saili Company has researched and developed the cambered surface adhesive 

aiming at this problem. Adhesive of this kind is simple to use as it only needs to apply adhesive to the right angle capable of forming a 

cambered surface after solidifying. The product is free from stains, damp, mildew and yellowing. So this kind of adhesive has resolved the 

problem for processing cambered surface of quartz stone. 

13428623059陈先生