消失模铸造电解铝氧化铝用吸铝管 吸铝管吸铝管是电解铝厂各种类型抬包（包括敞口抬包和真空抬包）上的易损备件。 工作原理 工作时，吸铝管插电解铝槽的铝液里，利用虹吸原理，铝水被吸入到抬包中。 组成与结构 优点 抬包吸铝管的价格低廉和耐腐蚀、耐热材料的优良性能结合起来，能有效延长吸铝管的使用寿命，同时，其制作工艺简单，材料成本低，因此该吸铝管具有很高的性价比。 技术参数 特性 表面质量好、缺陷少、使用寿命长 材质 Ht200 规格 3T、5T、6T、7.5T 10T 12T 15T 应用 适用于电解铝厂3T、5T、6T、7.5T 10T 12T 15T 真空包或依图纸加工 Aluminum suction pipe & Heat resistant aluminum suction pipe & aluminum suction tube for electrolytic aluminum and alumina Aluminum suction tube is vulnerable spare part on various types of lifting bags (including open lifting bags and vacuum lifting bags) in electrolytic aluminum plant. Aluminum suction pipe is inserted into the aluminum liquid in the electrolytic aluminum cell. Using the siphon principle, the aluminum water is sucked into the lifting bag. low price and excellent performance and corrosion-resistant and heat-resistant materials can effectively prolong the service life of the aluminum suction pipe. At the same time, the aluminum suction pipe has the advantages of simple manufacturing process and low material cost performance. Good surface quality, few defects and long service life material QT500 It is applicable to 3T, 5T, 6T, 7.5T, 10T, 12T and 15T vacuum bags in electrolytic aluminum plant prebaked steel anode yoke rod pins(anode steel stub) (ANODE ASSEMBLY) for aluminum electrolysis Professional company in prebaked anode yoke(anode steel stub) (ANODE ASSEMBLY) for aluminum electrolysis by using the advanced professional production line(EPC line) and physics and chemistry measurement and Analyzes laboratory. we have used Electrode Arc Furnace (Intermediate frequency electric furnace) and rare earth fining, had guaranteed the lowest aerometry and impurity in the melted steel, thus obtains the better electric conductivity and lower electronic resistivity. High quality and efficient productions can be directly used economically and practicably without cleaning up by the users thanks to the advanced Lost Foam Production(EPC) line , automatic reverberatory furnace processing and surface treatment by shot blasting machine. High qualities productions produced by specialized milling machine, make it very popular among our customers so that it has a wide international market. 2阳极钢爪 阳极钢爪在铝电解槽的阳极系统中起着承上启下的导电作用，不论阳极钢爪腿的数量多少和排列方式如何，目前钢爪的材质均为普通铸钢,生产电解铝行业用阳极铸钢爪的厂家,拥有先进的生产阳极铸钢爪全套生产线,理化计量及炉前快速分析化验室,各种检测设备及手段齐全,采用电弧炉(或中频炉)加稀土精炼,保证了钢水中含气量、含杂质降到低限度,从而获得较好的导电性能和较低的电阻率. 采用先进的干砂实型负压(消失模)铸造工艺,使用大吨位自控式反射炉进行人工时效处理,台车式抛丸清理机进行表面强化处理,可使产品全部露出金属光泽,特别是钢爪使用部分,不必进行清理可直接使用,使用户省时、省力、省成本. 采用机床进行机械加工.使用三铣头双面组合式铣床,四铣头四公尺龙门铣床等机加工设备,可按图纸要求严格完成,加工效率高、质量好.深受用户信赖和赞誉. (2)、技术要求: 1、材质根据用户需要 2、表面光滑,内部组织严密,不能有砂眼、夹渣、裂纹、气孔、缩松等缺陷. 3、钢爪尺寸按需方提供图纸生产 (3)、采用标准: 1、GB/T11352-1989 一般工程用铸造碳钢 2、GB/T5613-1995 铸钢牌号表示方法 3、GB/T6414-1999 铸件尺寸公差与机械加工余量