详情
产品规格
图文详情
品牌:
MITSUBOSHI/日本三星
加工定制:
是
材质:
橡胶
应用范围:
机械制造
适用环境:
耐酸
适用对象:
粘合机
型号:
SPA/SPB/SPC/SPZ
样品或现货:
现货
是否标准件:
标准件
是否进口:
是
拉力强度:
强力
日本三之星-SET FREE-三角带-SPA（规格齐全）
Belt construction
Wrapped V-Belts
v>
v> 
"Wrapped" means that the V-Belt core is protedted by cover fabric
made of cotton or polyester.
The cover fabric is coated with rubber to reinforce the wear resistance.
Raw Edge V-Belts
Raw Edge V-Belts have no fabric on the belt sides.
The special rubber compound ensures greater wear resistance
than Wrapped V-Belts.
Classical V-Belts for JIS K 6323
Classical V-Belts are most widely used power transmission belts.
Economical and easily obtained for replacement.
Maxstar Wedge V-Belts for RMA / MPTA
Maxstar Wedge V-Belts have double power transmission capacity of classical V-Belts
due to greater wedge effect. It features high speed transmission, energy saving, and
compact design.
Narrow V-Belts for DIN 7753 / ISO 4184
Narrow V-Belts enable space saving, high speed drive, and reduce the cost of
operating and maintenance.
It features oil / heat resistance and electrical conductivity.
Multi V-Belts
Multi V-Belts are made up of two or more standard V-Belts connected together
at the top of the belts. Multi V-Belts have the advantage of preventing the belts
from turning over or getting thrown off the drive even when belt vibration occures.
Double V-Belts
Double V-Belts are recommended for serpentine drives where the power must be
transmitted by both the top and the bottom of the belts.
Excellent flfl exibility in both directions.
Perforated open-end V-Belts
Perforated open-end V-Belts are designed for easy installation with metal fastners
and a screwdriver.
These belts are recommended for temporary use or when installation of the
standard V-Belts is diffifi cult.
陕西华天伟诺机械设备有限公司注册地址位于陕西省西咸新区沣东新城上林路4号院远立电气厂内第一排1楼6号，主营同步带轮制造！主代理德国欧皮特皮带，日本三之星皮带，意大利麦高迪皮带。
相关推荐
