详情
产品规格 图文详情
品牌:
道达尔
型号:
ELF EPONA SA 220
类型:
重负荷工业闭式齿轮油
SAE等级:
220
比重:
0.85
倾点:
-45
闪点:
250
粘度指数:
150

道达尔合成齿轮油ELF EPONA SA系列
ELF EPONA SA
Description
High performance synthetic gear oils.
 
Applications
All types of gears and worm gears working in extreme conditions of temperatures, load and speed.
ELF EPONA SA range brings a high level of working safety in comparison with mineral oils.
 
Properties
Very high viscosity index.
Low pour point.
Excellent anti-wear and extreme pressure properties.
Very good resistance to oxidation.
Good resistance to hydrolysis.
Good anti-rust properties.
Good compatibility with seals.
Miscible with mineral-based gear oils.
 
Characteristics
Characteristics
units
ELF EPONA SA
 
 
 
220
320
ISO Grade
 
220
320
Density at 15℃
Kg/m3
857
860
Kinematic viscosity at 40℃
Mm2/s
220.1
313.8
Kinematic viscosity at 100℃
Mm2/s
26.6
35
Viscosity Index
 
150
150
Flash Point(COC) ASTM D 92
>250
>260
Pour Point
-45
-42
FZG Test A/8.3/90
 
>13th
>13th
 
APPROVALS
ELF EPONA SA range are approved by ALFA LAVAL and WESTPHALIA for the lubrication of the bearings of separators.
 
Handling, Health and Safety
Lubricants consisting of highly refined mineral oils with specific additives.
In normal conditions of use, these lubricants present no particular toxic hazard.
All lubricants, of and kind, should always be handled with great care, particularly avoiding any contact with the skin.
Prevent any risk of splashing, and keep away form combustible materials.
Store under cover and away from any risk of contamination.
A safety data sheet complying with current legislation is available from your Lubmarine local representative
  特 性
 
?优良的极压性能:可耐高负荷
?突出的天然高粘度指数:优良的剪切稳定性
?低倾点,可在很低的温度下使用
?良好的抗氧化安定性,可在高温下使用,使用寿命增加2-4倍
?与所有密封件及含铜金属兼容
 
   
?与聚乙二醇润滑油不兼容 
 
  技 术 指 标
 
典型数据
单位
测试方法
          CARTER SH
150
220
320
460
680
密度(15℃)
kg/m3
ASTM D1298
857
859
863
864
865
运动粘度(40℃)
mm2/s
ASTM D445
150
220
320
460
680
运动粘度(100℃)
mm2/s
ASTM D445
19
25
33
44
65
粘度指数
-
ASTM D2270
145
150
150
155
155
闪点(开口杯)
ASTM D92
260
265
265
270
270
倾点
ASTM D97
-42
-39
-36
-33
-24
`FZG 微痕
-
FVA54 IIV
10
10
10
10
10
FZG
-
DIN 51354/2
>13
>13
>13
>13
>13
技术规范
DIN 51517 Part 3 Group CLP
NF-ISO6743-6 Category CKD
DAVID BROWN
CINCINNATI MILACRON
US STEEL 224
 FLENDER

相关推荐