产品说明： Product description:
适用于橡塑胶、纸品、彩印包装、胶粘带、箱包手袋、纺织、制药、五金、日化、食品、电线电子等行业。可测试各种材料及成品、半成品的物理性能，选购各种不同的夹具可做抗拉、抗压、持拉、持压、抗弯、撕裂、剥离、黏着力、剪力等试验。
Suitable for rubber and plastic, paper, color printing packaging, adhesive tapes, bags handbags, textile, pharmaceutical, hardware, cosmetic, food, electrical, electronics and other industries. To test the physical properties of the various materials and finished products, semi-finished products, choose a variety of fixture to do tensile, compressive, hold, hold pressure, bending, tear, peel, adhesion and shear test.

产品原理：Product principle:
本机为电子显示拉力试验机，使用马达传动螺杆而使夹具移动，将装置好试样夹具至于上下两夹具之间，然后施与规定之速度，上夹具向上拉伸试样时，上夹具上端的荷重元即感受到拉力，并将力转换成电压讯号输给显示器，结果连用LOAD CELL力量感应器链接显示器自动显示力量值
This machine is electronic display tensile testing machine, the use of the motor drive screw and make the jig moving, the device between good sample clamp for the two, and then give speed, under the provisions of the fixture upward tensile samples, namely feel tension LOAD at the top of the fixture on the yuan, and will be converted into a voltage signal to display, a laparoscope, usually connected to a result the LOAD CELL power sensor link automatically display values
 
设计标准：Design criteria
ASTM D903、GB/T16491  、GB/T1040 、GB/T8808  、GB13022  、 GB/T2790/2791/2792、 CNS-11888   JIS K6854、PSTC-7
 
技术参数：Technical parameters:
1、规 格 感 应：LOAD CELL力量感应器容量500KG，1T
2、测力 准确度：优于±1.0%
3、测力 分辨率：1/250000
4、测 力 范 围：1～100%F.S
5、变形示值准确度：优于±1.0%
6  显       示：微电脑液晶屏显示
6、试验速度范围：0.001～500mm/min，（可任意设定、微型计算机控制）
7、试验最大行程：最大1000mm，不含夹具 
8、单 位 切 换：g，kg,  N,  LB（提供国际标准制、公制、英制三种，自行切换使用）
9、停  机 方 式：上、下限安全设定，紧急停止键，程序力量及伸长设定
10、取 点 方 式：试验过程中手动取点及预先设定取点（20点），可作持拉和持压测试
11、机 台 尺 寸： 980×510×1600mm(W×D×H)
12、机 台 重 量： 约170kg 
13、动       力： DC马达 
14、电       源： 1PH，AC220V，50/60Hz
 1, rules, should be: the LOAD CELL power sensor capacity of 500 kg, 1 t
2, the accuracy of measuring forces: better than that of plus or minus 1.0%
3, load resolution: 1/250000
4, load range: 1 ~ 100% F.S
5, the deformation value for accuracy: better than that of plus or minus 1.0%
6 show: microcomputer LCD display
6, test speed range: 0.001 to 500 mm/min, (can be set arbitrary, microcomputer control)
7, test range: the maximum 1000 mm, excluding the fixture
8, single switch: g, kg, N, LB (provide international standard system, three inches, meters, switch to use)
9, stop the machine type: upper and lower limit set security, emergency stop button, the strength and elongation set program
10, take party type: manual take in the process of test and preset point (20 points), a pull and pressure testing
11, machine feet inches: 980 * 510 * 1600 mm (W * D * H)
12, machine units: about 170 kg
13, dynamic force: DC motor
14, the electric source: 1 ph, AC220V, 50/60 hz